History Of Cleanings; Language And Volume; Do Not Disturb Mode; Remote Control - eta AURUM PRO Gebrauchsanleitung

14. HISTORY OF CLEANINGS

• Go to settings „
1
• Click on „Cleaning
• By this, you will obtain simple review of the
performed cleanings.
• Click on a particular cleaning in the list
2
of cleanings in the history to see detailed
information on the corresponding cleaning.
• Click on „delete" in the top right corner to
see a selection of individual cleanups.
3
• You can mark the ones you want to delete.
You can then delete the selected cleanings
by clicking on „delete" in the lower right
corner.

15. LANGUAGE AND VOLUME

".
history".
1

16. DO NOT DISTURB MODE

1
• Go to settings „
".
• Click on „Sounds and volume settings".
1
• Now you may set sound volume and
language of the audio warnings or may
fully switch-off them.
• Go to settings „
".
• Click on „Switch disturb".
• You can now set a time range when the
1
voice alerts will be silenced and the robot
will not continue cleaning if it cannot finish
cleaning due to a low battery.
• To activate this mode, use a switch in the
right upper corner.

17. REMOTE CONTROL

• Go to settings „ ".
• Click on „Manual control".
• Now you may control the vacuum cleaner
similarly as with a standard remote control
panel.
• Click „Exit" to exit the mode.

18. MONITORING OF SERVICE LIFE OF COMPONENTS

• Go to settings „
".
• Click on „Consumables
• You may here easily obtain information
on the service life of particular components
of the vacuum cleaner (HEPA filter, side
brushes, main brush).
ENG
management".
ENG - 40