Profitec Pro 700 Bedienungsanleitung Seite 31

Bedienungsanleitung / User manual Pro700
4
Remove the shower screen and
the gasket completely.
7
Insert the shower screen into the
brew group.
10
Then, move the filter holder until
the shower screen is locked
firmly into the gasket.
The machine can be used again, as described on page 23 of the instruction manual.
The steam nozzle is blocked
Clean the holes of the steam nozzle carefully with a needle or with a paper clip.
For this purpose, the steam nozzle may be unscrewed as well.
Important
Do not lose the small gasket situated between the steam nozzle and the thread!
Afterwards replace the steam nozzle.
5
Keep the new spare parts ready
at hand (the rounded side of the
group gasket with PROFITEC
print faced upwards to the
brewing group).
8
Take the filter holder without
filter.
11
Now you can easily lock the filter
holder into place.
30
6
Clean the group with a brush.
Lock the shower screen firmly
into the gasket.
9
Clamp the filter holder into the
brew group.
12
The group is ready for use.