Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2
1
3
8
6
5
7
9
On the other side, release the end of the clip mechanism (5+6) and feed the loop
through the loop holder (7). Then pull the end through the loop (8), tighten it (9), and
attach the clip to the other end of the side carrying strap (10).
Note: When the carrying strap is mounted, the objec-
tive lense cover can be fixed to the carrying strap.
1
4
3
2
18
ATC/STC / EN
ATC/STC / DE
4
10
2.3 MOUNTING ON THE TRIPOD HEAD
The ATC/STC has a
that has been inserted reduces the thread to ¼" UNC. The
thread can therefore be used to mount an adapter plate and
1/4"
the spotting scope is compatible with all common tripod heads.
2.4 USE WITHOUT A TRIPOD
For use without a tripod, a detachable half shell is supplied. This can be attached using
the locking screw provided and the connection thread.
Step 1: Remove the bush from the connection thread in the spotting scope.
Step 2: Remove the O-ring (black ring) supplied to protect the locking screw during
transport.
2
1
3
ATC/STC / EN
ATC/STC / DE
/
" UNC connection thread. The bush
3
8
4
19
Werbung
