Einstellungen
Aktions-URL
Aktions-URL empfangen
Aktions-URL
Mit den Aktions-URLs kann das Telefon HTTP-Befehle vom PC empfangen und ausführen.
Außerdem kann das Telefon Befehle versenden.
Aktions-URL empfangen
Voraussetzungen:
• Im Telefon aktiviertes Kontrollkästchen Aktions-URL empfangen.
1. Starten Sie einen Browser (z. B. Mozilla Firefox).
2. Die folgende Tabelle zeigt die möglichen Aktionen und die entsprechenden http-
Befehle. Geben Sie einen der folgenden HTTP-Befehle ein:
Reboot
http://phoneIP/remote_control?action=REBOOT
Auslieferreset
http://phoneIP/remote_control?action=FACTORY_RESET
Update
http://phoneIP/remote_control?action=UPDATE
Provisioning
http://phoneIP/remote_control?action=PROVISIONING
Register
http://phoneIP/remote_control?action=REGISTER
Anruf
http://phoneIP/remote_control?action=CALL&number=<PhoneN-
umber>&accountId=<AccountID>
Anruf beenden
http://phoneIP/remote_control?action=HANGUP
DTMF
http://phoneIP/remote_control?action=DIAL&number=<PhoneNumber>
Anruf halten
http://phoneIP/remote_control?action=HOLD
Gehaltenen Ruf
http://phoneIP/remote_control?action=RETRIEVE
zurückholen
Konferenz
http://phoneIP/remote_control?action=CONFERENCE
3. Drücken Sie die Enter-Taste.
Empfang von Aktions-URL ein-/ausschalten
Vorgehensweise:
540
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.4A - Bedienung und Konfiguration V04 02/2016