Honeywell Miller HandZup Anwendungshinweise Seite 16

6 - PERIODIC REVIEW
Complete the identification form by copying the marking information.
A periodic review checking the effectiveness and strength of the equipment is essential to ensure the
safety of the user.
This equipment must be examined at least once a year; a qualified person must examine this equip-
ment in compliance with these instructions and appropriate details of the inspection must be re-
corded.
At each periodic review, complete the identification form on page 182.
The frequency of examination should be increased according to the regulations, in the case of heavy
use or harsh environmental conditions. The legibility of the product markings must be checked.
7 - TRANSPORT AND STORAGE
Proper storage of your PPE will ensure better product longevity, whilst also ensuring your safety.
During transport and storage phases, make sure your PPE is hung away from heat sources, humidity,
corrosive atmosphere, ultraviolet rays, etc. and prevent your PPE from being subjected to any impact
or excessive vibration. See figures 13.
8 - CLEANING
Proper care of your PPE will ensure a longer life for the product, whilst also ensuring your safety.
Be sure to adhere strictly to these guidelines:

Clean with water and mild soap. Do not use any solvents, acids or bases under any circumstances.

Allow to dry naturally in a well ventilated area away from any open fire or other heat source.

For a more thorough cleaning, we recommend that you remove the rope lanyard (see paragraph
5-3). See figures 13.

When used in certain conditions the mechanism may get contaminated. In that case, it is neces-
sary to ensure that proper cleanup is frequent enough.
In doing so, follow the instructions for suspension cable replacement (see section 5-3).
You can use compressed air to remove all foreign bodies that occur within HandZup. Pay attention
mainly to ensure that nothing prevents the rotation of the cam and that the inner spring presses it
correctly against the suspension cable.
9 - LIFESPAN
The maximal life of PPE that is predominantly textile is evaluated as being 10 years after the date of
manufacture. For our products which are mainly metal, we do not give a lifespan; it can be unlimited
if the product is checked regularly (annually). However, the following factors can affect the perfor-
mance of the product and its lifespan: improper storage and/or misuse (ignoring the instructions
of this manual), mechanical deformation, contact with chemicals (acids, alkalis, solvents, etc.) and
exposure to high heat (> 60 ° C).
10 - MEANING OF MARKINGS (CF 171)
APPENDICES
Appendix 1: List of products in the Miller HandZup® range (CF 176-177)
Appendix 2: PPE compatibility
16
NT90022466 IND D.indd 16 22.04.16 10:38