Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
40
● Push the cleaned or the new quartz glass tube inside and lead it
through the wiper.
● Check the O-rings and replace them if necessary.
● Put the O-rings and the pressure discs on both sides of the quartz
glass tube.
● Screw in the quartz glass tube screw joints slightly by hand and
centre the quartz glass tube.
● Fasten the screw joints using the assembly spanner.
● Open the supply line valve.
● Fill the radiation chamber and then bleed it.
● Check to ensure that no connections are leaking.
● Install the lamp (see "Replacing Lamps").
● Turn on the main switch.
Werbung
