Zodiac ZOOM 230 Roll Up Bedienungsanleitung Seite 23

The inflation system is composed of:
THE HIGH PRESSURE FOOT-PUMP FOR MODELS WITH AN INFLATABLE AEROTEC FLOOR
A
THE STANDARD INFLATOR – EXCEPT FOR AEROTEC MODELS.
A. tube nozzle
B. tube connector
C. inflation port
THE VALVES .
To change the position:
Push / Push
INFLATION SYSTEM
B
C
1/4
Inflation position
diaphragm closed, the inner
button springs upwards
7 / 12
Position A
The pump has maximum flow but low
pressure: this position is used to give
shape rapidly to all inflatable parts of
the boat.
Position B
The flow is inferior to position A, but
provides pressure that is superior, with
the same effort.
Position C
To deflate. Insert the tube as indicated
in figure C and pump normally.
Deflation position
diaphragm open, the inner
button goes down
E
N
G
L
I
S
H
A
B
C