Herunterladen Diese Seite drucken

Coltri Compressors SUPER SILENT EVO MCH-13/ET Bedienungs- Und Wartungshandbuch Seite 20

Werbung

ENGLISH
6
Lubricating oil info plate
Check oil level before starting the compressor. Use only COLTRI OIL ST755
(see "7.10 Checking and changing the lubricating oil").
7
Cooling fan direction of rotation info label.
When using the machine for the first time check that the fan rotates in the
direction indicated by the arrow.
If, on a three-phase electric motor compressor, the fan rotates against the
direction of the arrow invert two of the three phases on the main power
lead.
8
Cartridge change info label.
To change the cartridge refer to "7.9 Purifier filter".
9
Maximum working pressure.
232
3300
10
Oil drain label.
Indicates the position of the lubricating oil drain taps.
20 - 60
CHECK OIL LEVEL BEFORE
STARTING THE COMPRESSOR
USE ONLY COLTRI OIL ST755
FILTRO CON CARTUCCIA DA
SOSTITUIRE AD INTERVALLI
REGOLARI - VEDI MANUALE
FILTER WITH CARTRIDGE
TO BE REPLACED AT REGULAR
INTERVALS - SEE MANUAL
300
BAR
PSI
SCARICO OLIO
OIL DRAIN
SUPER SILENT EVO
DEUTSCH
Typenschild Schmieröl
Den Ölstand vor der Verwendung des Kompressors prüfen. Nur COLTRI
OIL ST755 verwenden (siehe Absatz „7.10 Kontrolle und Wechsel des
Schmieröls").
WARNING
Schild Drehrichtung Kühlgebläse.
Bei Erstinbetriebnahme der Maschine überprüfen, dass sich das Kühlgebläse
in der vom Pfeil angegebenen Richtung dreht.
Sollte es sich bei Kompressoren mit Dreiphasen-Elektromotor in der falschen
Richtung drehen, zwei der drei Phasen an der Hauptstromversorgung
umkehren.
Schild Patronenwechsel.
Für den Patronenwechsel siehe Abschnitt „7.9 Reinigungsfilter".
Max. Betriebsdruck.
BAR
4300
PSI
Schild Ölablass.
Zeigt die Position der Schmierölablässe an.
330
BAR
4700
PSI
MU-SSE-0920

Werbung

loading