Endress+Hauser Graphic Data Manager RSG40 Memograph M Zusatzanleitung Seite 28

Device configuration, application setup
"Batch - Batch x" menu
items
Status
Identifier
Batch name
Batch number
Preset counter
Start time
Started by
Start or end batch
28
2.6 Use during operation
2.6.1 "Batch" menu
During operation, an individual symbol is displayed for each batch at the top, right in the
measured value display. A green symbol indicates the batch has started. A red symbol
indicates the batch has stopped.
NOTICE
Only channels which are assigned to an active batch are displayed, i.e. if "Batch x" or
"Assign all batches" is configured under "Application -> Signal groups -> Group x ->
Batch assignment" - in Setup. All other channels are disabled.
Call up the "Batch" menu by pressing softkey 3 or using the main menu:
Fig. 8: "Batch" menu
This menu is used to enter batch information and control the batch.
Current status of the batch.
Text field for identifying the batch. Text entry: max. 30-digit
Text field for identifying the batch. Text entry: max. 30-digit
Enter a batch number. Text entry: max. 30-digit
Can also be generated by the device as an option. An automaticlly generated batch number has 9 digits max., is
numerical and does not have a leading sign.
Note: the function depends on the settings under "Setup -> Application -> Batch mode -> Batch number".
Configure the default value for the preset counter here. User input: max. 12-digit.
The batch is automatically ended when the counter value >= the default value.
Once a batch is started, the start date and time are displayed here.
If user administration is activated, the name of the user who started the batch is displayed here.
You can start or end the batch here.
Note: If user administration is activated, a user must be logged on so that a batch can be started/ended.
2.6.2 Starting/ending batches
Batches are started or ended using the following
• Control input (an individual control input for each batch)
• Operating the device (softkey 3 or under "Main menu -> Batch")
Description
Graphic Data Manager