Safety Advise; Range Of Application; Installation; Brake Motors - Sumitomo DRIVE 6000 Betriebsanleitung

D R I V E 6 0 0 0 O p e r a t i n g M a n u a l
6 . E l e c t r i c a l i n s ta l l a t i o n
6.1 Safety advice
Installation, start up and servicing should only be done by qualified personnel.
Before commencing upon the servicing of the motor or the gearmotor, particularly before
opening covers to active parts, the main electrical supply must be discounted.
Please follow the five safety rules according to DIN VDE 0105..
The motors comply with the low voltage directives 73/23/EWG..

6.2 Range of application

The motors are totally enclosed fan cooled. Standard protection is IP55, and with brake IP 44.
Ambient temperature: -10° . . . +40°C
Ground level: < 1000 m
Winding is insulation class F (150°C). It is normal for the reducer to operate at a housing tem-
perature of up to 100°C. Therefore, any contact with them must be prevented. Temperature
sensitive parts must never be fastened to or be in contact with the motor.

6.3 Installation

Ventilation openings must be kept clear.
For correct cooling the distance FB is the minimum required between the fan cover and the wall.
FA is the minimum clearance required for disassembling the fan cover.
Standard Motor
Motor
63 - 71
Size:
FB (mm):
FA (mm):
Brake Motor
Motor
63 - 71
Size:
FB (mm):
FA (mm):
D6000_GB_08_06 NO. 991009
90 100 112-132S 132M-160M
80
20 20 20 20
52 56
48 49
90 100
80
20 20
20 20
61 93 115 121
FA or FB
20 25
60 75
112-132S 132M-160M
25 25
132 170
Issue: 08/2006
160L 180M 180L 220
30 30 30
130 155 170 230
160L 180M 180L 220
30 30 30
220 367 370 445
page 21
30
30