Oil Change - Sumitomo DRIVE 6000 Betriebsanleitung

D R I V E 6 0 0 0 O p e r a t i n g M a n u a l

9.4 Oil change

First, the main electrical supply must be disconnected.
Wait for the unit to cool to prevent burns!!
Change oil with the gear still warm, as this is beneficial for draining.
Place a collector under the oil drain.
Remove the oil level indicator, any breather plug, breathing valve and oil drain screw.
Drain oil completely.
Replace the oil drain plug and fasten it.
Fill with new oil according to the oil recommendations. In case you wish to use another oil type,
please contact Sumitomo Drive Technologies.
For oil quantities, see 8.2.3 "oil quantities".
Check oil level at the indicator.
Fasten oil breather.
Dispose of the oil according to environmental protection instructions.
D6000_GB_08_06 NO. 991009 Issue: 08/2006 Page 31