Bergstrom OpenAir Montageanweisungen Seite 19

- If the cable passes through sharp-edged walls
during installation, use ducts or guides to
prevent any damage to it.
- Important alert: Make sure the polarities are
not reversed when connecting the unit. If this
happens, the control board will not come on
and the unit will not work.
Tools required for assembly
- Ratchet with 13 mm wrench.
- Torx screwdriver.
- 13 mm open-end wrench.
- Cutter.
Proper use of the product
- OPENAIR is a high-performance roof-mounted
air conditioning unit for use in motorhomes and
other recreational vehicles. Installation in any
other type of vehicle is not recommended.
- Using it in any way other than as envisaged
will void the unit's warranty and exempt the
manufacturer from any liability.
- See the product's user manual if you are not
sure how to use OPENAIR.
Associated documentation
- Quick guide: 1003303110
- User manual: 1003303114
- List of spare parts: 1003303116
- Troubleshooting: 1003303115
Dirna Bergstrom uses excellence assurance
processes in accordance with international quality
management standards ISO 9001, Automotive Quality
IATF 16949, and Environmental Management ISO
14001 to ensure the highest quality of its products.
Certified by IQNet Quality System.
OPENAIR EN
19
TU ESPACIO DE VIDA CONFORTABLE