Bergstrom OpenAir Montageanweisungen Seite 18

EN OPENAIR
Firstly, may we congratulate you on your decision to
purchase the 12 V OPENAIR air conditioning unit from
our Adventure range. You are now the owner of a high-
performance air conditioning unit manufactured by Dirna
Bergstrom for use in mobile homes and other recreational
vehicles, with or without the engine running.
OPENAIR is a technologically advanced solution that
optimises performance and reduces energy consumption
in your vehicle's auxiliary battery. These are the features
that make it unique on the recreational vehicle climate
control market.
Read this document carefully before
installing the product. Keep this document for
future reference. The original documentation
was written in Spanish, all other languages are
translations.
All product manuals are available in digital
version (PDF) at
https://www.bergstromspain.com/
All sales and warranty transactions are subject
to the latest version of our general terms and
conditions of sale, as published on our website
https://www.bergstromspain.com/
The manual includes the latest technological
advances in this range at the time of publication.
However, continuous improvement means there
may be minor differences.
Explanation of symbols
- Warning: A safety alert indicating a situation
!
which, if not avoided, could result in death or
serious injury.
- Hazard: Cutting hazard. Indicates a situation
that could lead to cuts.
- Hazard: Electrocution hazard. Indicates a
situation that could lead to electrocution.
- Alert: Safety alert informing about a situation
which, if not avoided, could result in damage to
the unit or other materials.
- Information: Additional information on
installing or handling the product.
- Fragile: Indicates a situation in which care
must be taken to avoid damage to the unit and
other materials.
18
TU ESPACIO DE VIDA CONFORTABLE
Explanation of liabilities
- Dirna Bergstrom accepts no liability for any
damage caused in the following cases:
• Damage to the product due to mechanical
influences and surges.
• Modifications to the equipment without the
manufacturer's express consent.
• Use of the equipment for purposes not
described in this document.
• Improper handling or installation of the air
conditioning unit.
- When installing OPENAIR on the roof, bear in
mind that vehicles with a skylight normally have a
structure strong enough for the weight of the unit.
However, whenever it is necessary to make a cut
in the roof, or when the roof material used with the
skylight is not strong enough (fibreglass, plastic,
etc.), the installer must decide, under his/her
sole responsibility, on the need to reinforce the
roof in order to avoid any deformation, breakage,
water ingress, etc., and must provide the necessary
means to prevent this from happening.
OPENAIR is a versatile unit that can be installed
every 90º in order to adapt to the available space on
the vehicle's roof, meaning it does not interfere with
the rest of the accessories.
Warnings during assembly
!
- This equipment may only be installed, repaired,
and maintained by technical personnel with
due training in vehicle air conditioning, potential
hazards and applicable standards.
- Read the assembly instructions carefully before
installing OPENAIR. Follow the instructions
carefully during installation.
- Switch off the ignition key before starting to install
the unit.
- Disconnect the vehicle's battery before starting to
install OPENAIR.
- Install OPENAIR securely to prevent it from
falling.
- Use appropriate tools for each operation.
- During installation, ensure the connection of the
electrical components, checking that they are
fitted correctly.