Bergstrom OpenAir Montageanweisungen Seite 21

OPERATIONS BEFORE INSTALLING OPENAIR IN VEHICLES
WITH NO ROOF HATCH
1 Place the OPENAIR unit on the roof of the
vehicle, ensuring it is positioned optimally to
avoid interference with other elements, taking
into account that it should match the assembly
position of the unit's interior console.
Note: OPENAIR is a versatile unit that can
be installed every 90º in order to adapt to the
available space on the vehicle's roof, meaning
it does not interfere with the rest of the
accessories.
2 Take measurements of the location of the
unit and the position of the interior console,
ready to be used as a reference when making
the hole in the roof where OPENAIR will be
installed.
3 From inside the vehicle, mark the 400 x 400
mm space where the unit will sit with the unit's
interior console. Drill (4) holes in the 4 corners
of the marked space.
From outside the vehicle, join the holes by
cutting the roof using a jigsaw. Complete the
cut from the inside by cutting the batting and
the false ceiling.
Caution: Take care when making the cut, as
there may be a cable duct inside.
OPENAIR EN
21
TU ESPACIO DE VIDA CONFORTABLE