Tools Required For Assembly; Associated Documentation - Bergstrom SLIMFIT RENAULT T High Sleeper Cab Montageanweisungen

SLIMFIT

Tools required for assembly

- Torx wrenches set.
- Allen wrenches set.
- Open-jawed spanner 10, 13, 14.
- Scissors.
- Flexo-meter.
Proper use of the product
- SLIMFIT is a roof-mounted air conditioning unit
suitable only for use in trucks. It is not suitable
for installation and operation in agricultural
or construction machinery subject to intense
vibrations.
- Non-intended use will void the unit's warranty and
exempts the manufacturer from any responsibility.
- If you are not sure how to use SLIMFIT, read the
product's user manual.
- If the temperature in your vehicle's cab is too
high for rest, first cool the cab with your vehicle's
air conditioning for a few minutes and then run
SLIMFIT to maintain the comfort temperature.

Associated documentation

- Quick guide: 1003115344
- User manual: 1003112451
- List of spare parts: 1003112055
- Troubleshooting: 1003112452
Dirna Bergstrom declares that the SLIMFIT unit
complies with the requirements of the following EC
Directives and that the harmonised standards and
technical specifications listed below have been
applied:
- EC Directive 2014/53/EU
- EC Directive 2011/65/EU
- EC Directive 2014/30/EU
15
EN