For The Closed Loop Control Characteristics In Pilot Operation; For The Closed Loop Control Characteristics In Standby Operation; Setting The Rudder Factor; Setting The Rudder Response Band - KIENZLE VDO LOGIC PILOT Montage- Und Bedienungsanleitung

Settings for the closed loop control characteristics in pilot operation
In pilot operation, the following parameters can be set by pressing the PROG key:
Rud ?

Setting the rudder factor

Resp ?

Setting the rudder response band

Exit ? Exit from the programming menu
Settings for the closed loop control characteristics in standby operation
In standby operation, the following parameters can be set by pressing the PROG key:
Rud ? Setting the rudder factor
Resp ? Setting the rudder response band
AP-Adj? Basic autopilot settings
C-Adj? Compass functions
Save? Save the settings
Exit ? Exit from the programming menu
38
SETTINGS
(p.39)
(p.39)
(p.39)
(p.39)
(p.41)
(p.43)
(p.45)