Herunterladen Inhalt Inhalt Diese Seite drucken

The Universal Remote Control; Safety Instructions; Scope Of Application; Programming Device Codes - Medion MD 83533 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The universal remote control

Safety instructions

Do not repair the device yourself
The universal remote control has a class 1M infrared diode. Do not examine the laser with optical in-
struments!
Do not subject your remote control to dust, strong sunlight, moisture, high temperatures or strong vi-
brations.
Do not use any corrosive or aggressive cleaning products.

Scope of application

This universal remote control can operate the following types of devices:
Television
TV
Set-top box or SAT or DVB-T receiver
STB
DVD player MD 82533
DVD
Video, hard drive or DVD recorder
VCR
Other devices (e.g. amplifier, tuner, etc.)
AUX
The label indicates the device type to be programmed. It is used to provide an easier overview.

Programming device codes

General information
For every device that you would like to operate using the universal remote control, you must program a
three-digit device code to a source key (
mode") with the exception of the TV button, which can only be assigned one television.
Video recorder: Perform the code search when a video is in the machine.
Enter the device code according to the code list
The codes of the corresponding devices can be found in the Code List enclosed with these operating
instructions. Proceed as follows:
Switch the relevant device on manually.
Briefly press the required souce key(
Keep the
key pressed for approx. 3 seconds until the blue LED remains solid.
CODE
Enter the four-digit code from the Code Table.
The key lighting will extinguish briefly each time the key is pressed.
If the entered code was valid, the light of the source key will extinguish after the last digit has been en-
tered. If an invalid code was entered, the blue LED flashes for three seconds before extinguishing.
If the device does not respond as expected, repeat the programming, or try a different manufacturers
code. Select the code to which most of the remote control commands react correctly.
If this is also unsuccessful, the try one of the search methods described in the following sections.
,
,
). You can assign any key to any device ("flex
TV
SAT
AUX
,
,
,
).
TV
STB
VCR
AUX
ES
EN
DE
37

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Life p71014

Inhaltsverzeichnis