Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Button functions
Operating the player using the controls on the player or remote control
Buttons on the front of the player
You can activate the main play functions of the player using the buttons on the front of the unit.
Buttons on the remote control
In addition to these basic controls the remote control also provides numerous additional options for
using all functional elements of your DVD player. You can, for instance, use the remote control to navi-
gate through the menus, which are then displayed on the television screen.
NOTICE!
In this manual we are describing the remote control buttons as the remote control (with the
exception of the power switch) includes all the functions of the unit. If reference is made to
the controls on the DVD player itself, this will be clearly indicated.
Standby/Switching on/Switching off
Standby mode
Use the
POWER
button on the rear of the unit to switch off the unit completely.
The blue LED comes on when the device is in standby mode.
Switching on
Press
(
STANDBY
The type of display depends on the type of recording medium.
Switching off
Press
(
STANDBY
mode. The display will go out.
Inserting a disc
Make sure that there is about 15 cm of space in front of the disc compartment so that it can open with-
out hindrance.
Switch the unit on and press
Insert a disc into the disk compartment with the title side upwards.
Make sure that you place the disc in the middle of the disc holder so
that it does not stick when you close the compartment.
Press the
OPEN/CLOSE
DVDs start playing automatically after a few seconds. The type of display depends on the type of disc.
You may need to press
to make a selection using the arrow keys.
20
), to switch the unit on. The display lights up.
) again to switch the device into standby
OPEN/CLOSE
button. The disc compartment closes.
PLAY
, otherwise a menu may appear in which you need
.
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
