Second Or 3 Second Intervals - Medion MD 83533 Bedienungsanleitung

Code identification
Code identification gives you the opportunity to determine codes that have already been entered and
stored in the remote control. Proceed as follows:
Switch the relevant device on manually.
Briefly press the required source key (
Keep the key pressed for approx. 3 seconds until the blue LED remains solid.
CODE
Briefly press the
CODE
To find the first number, press the number keys from 0 to 9. If the blue LED extinguishes briefly, then
it is the first stored number.
To determine the second number, press the number keys again from 0 to 9. Repeat the procedure for
the third and fourth number.
The blue LED will extinguish as soon as the button for the fourth number has been pressed.
Code identification has now been completed.

1 second or 3 second intervals

If you want the remote control to transmit a new code every 3 seconds instead of every second, proceed
as follows:
Within 6 seconds of pressing the
key again. The remote control will now only transmit a new code every 3 seconds. This gives you
P–
more time, but the procedure will also take longer.
, ,
TV STB VCR
button. The blue LED will briefly extinguish after the key has been pressed.
P+ (or ( PLAY
, ).
AUX
) or ) key as described in Point 4 press the
ES
EN
DE
P+ or
39