Audio menu
Speaker configuration
Dow nmix:
If you use the analogue 5.1 output you can change the loudspeaker settings from this menu.
L T /RT :
The left and right audio channels are used.
Ster eo :
This option produces stereo sound.
V SURR : The analog stereo sound will be converted virtually as surround sound.
5 . 1CH : Select this setting if you have connected a digital audio amplifier or a surround sound sys-
tem.
F ron t
D ec id e on the size for the front speaker:
L ar g e: Choose this setting if the diameter of the front speaker diaphragm is larger than 12 cm.
Small : Choose this setting for smaller loudspeakers.
C e n tr e , R ea r (only enabled in speaker setting V SURR and 5.1.CH):
Decide on the size of the centre and rear speakers or disable:
L ar g e: Choose this setting if the diameter of the front speaker diaphragm is larger than 12 cm.
Small : Choose this setting for smaller loudspeakers.
O f
f:
You can set the centre and rear speakers to O f f if you want to operate the unit with the front
loudspeakers only.
Su bwoo fer :
O n: Choose this option to switch the subwoofer on.
O f f: You can set the subwoofer to O f f if you want to operate the unit with the front loudspeakers
only.
D ia log : You will set the dialogue volume in this Menu.
Pos t DRC : Differences in volume, particularly in the case of music, are balanced with DRC (Dy-
namic Range Control), so that the music reproduced is output at the same volume. You can switch
on the function (On ), switch it off (O f f) or activate it automatically, if this is available(A u to ).
SPDIF
S P D IF- O u t: Set the function to S PD IF /R aw , if you have connected an AV receiver to a digital
audio output. Select SPDIF/PC M , if your television device/amplifier does not have a Dolby Digital
or MPEG decoder.
L PC M OUT: Select the decoder with which the sound should be transmitted here. The higher the
value, the better the sound quality.
ES
EN
DE
31