Simons Voss Technologies PegaSys 2.1 Kurzanleitung Seite 36

11. Technical data wall/authorisation
reader 2.1/4.1
Fuse
Switch output
Switching power
Switching voltage
Input
Operating temper-
ature
Protection rating
Humidity
RFID credential
reader
Read range
Cable reader to IO
connector
IO connector cable
to online controller
Signalling for users
Radio emis-
sions
13.553 MHz - 13.567
MHz
36 / 72
Self-resetting fuse on the IO connector (NTC)
1 relay with NO or NC contact (adjustable with
jumper, factory set: NO)
Max. 2 A
Max. 30 V
1 input for button with NO contact
-25 °C to +55 °C
Reader: IP65 (electronics cast)

IO connector: IP00

Max. 95%, non-condensing
MIFARE or LEGIC (depending on order)
Up to 40 mm depending on the size of the iden-
tification medium
7 wires incl. RS485 bus, max. 100 m (e.g. JY(ST)-
Y 4x2x0.6 mm)
RS-485 bus (2-wire), max. 1200 m (e.g. JY(ST)-
Y 4x2x0.6 mm)
beeper

LEDs (red/green/blue)

< 42 dBµA/m (10 m distance)
PegaSys Wall/authorisation reader
2.1 and 4.1
EN