Startup / Operation - BOMANN VS 3173 Bedienungsanleitung

• Attach the lower door hinge at the respective opposite
appliance side, after you have unscrewed the hinge pin
and used by the other hinge side. Transfer also the foot
bracket to the respective opposite side. Turn in the feet
accordingly.
• Replace the appliance upright again. Insert the appliance door on the lower hinge pin and fix the door to
the property position.
• Transfer the upper door hinge at the opposite appliance
side, after you have unscrewed the hinge pin and used
by the other hinge side. Put the hinge pin in the hole of
the appliance door and tight the screws of the hinge.
• Replace the appliance cover, which you have removed
at the beginning. Tight the screws and clip the screw
covers on.
• Check if the door is arranged vertical as well as horizontal, so that a smooth opening and closing of the
door is ensured.
• Dismount the door handle and attach it to the corresponding other door outer side. Refer to the instructions
in "Assembling the door handle". Transfer the cover caps on the exposed holes to the respective other
door outer side.
Prior to first use Prior to first use Prior to first use Prior to first use
CAUTION: : : : CAUTION
CAUTION CAUTION
After transport, the appliance should be left standing upright for about 4 hours before connecting to the power
supply. Nonobservance could lead to malfunction of the cooling system and causes a breakdown of the appli-
ance.
Clean the interior of the appliance including all accessory parts located inside. Consider the instructions which
we provide in the chapter "Cleaning and Maintenance".
Starting the appliance Starting the appliance Starting the appliance Starting the appliance
• Connect the appliance to the power supply.
• Operate the temperature control, which is located in the appliance interior. See also the following section
"Settings".

Startup / Operation

Startup / Operation Startup / Operation Startup / Operation
22