Startup / Operation - BOMANN KS 2194.1 Bedienungsanleitung, Garantie

• Transfer and attach the lower door hinge to the
opposite appliance side. Screw in the feet accord-
ingly.
• Put the appliance back in the upright position.
Put on the appliance door and fix it its intended
position.
• Transfer and attach the upper door hinge to the
opposite appliance side after unscrewing the
hinge pin and inserting it into the adjacent hole.
Screw in the screws (s) on the opposite side.
• Replace the appliance cover and fix it.
• Dismount the door handle and attach it to the
corresponding other door outer side. Refer to the
"Assembling the door handle".
instructions in
Transfer the cover caps on the exposed holes to
the respective other door outer side.
Check that the door is optimally aligned both vertical-
ly and horizontally to ensure smooth opening and
closing of the door.
Reversing the freezer door opening
• Keep the freezer compartment door closed. Dis-
mount the holding (1).
• Remove the freezer door including the upper
hinge pin cover (a) to the below.
• Dismount the snapper (2) and attach it to the op-
posite side.
• Seal the now exposed holes with the supplied
plugs (b). Turn the door by 180° and transfer it to
the opposite side. Move the upper hinge pin cover
(a) accordingly.
• Keep the freezer compartment door closed. At-
tach the holding (1) on the opposite side.

Startup / Operation

Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
"Cleaning and Maintenance".
the chapter
Starting the appliance
• Connect the appliance to the power supply.
• Set the operating conditions. See also the follow-
ing sections.
Settings
Position [ 0 ] means that the appliance is in the
switched-off state. Turn the temperature control
clockwise from this position, the appliance switches
on automatically.
The power levels control the different values of the
internal temperature.
Power level
lowest level,
1, 2
warmest internal temperature
medium level,
3, 4
optimal operating temperature
highest level,
5, 6, 7*
coldest internal temperature
*Beware of high setting because the maximum level may
already mean "freezing point".
The freezer temperature is automatically con-

trolled by the power level setting in the fridge.
23