Startup / Operation - BOMANN KG 7320.1 Bedienungsanleitung, Garantie

Replace the positions of the hinge pin

retainer and blind plug on the top of
the door.
Transpose the doorstop on the un-

derside of the door. Set the freezer
door safely aside.
Tilt the unit slightly backwards and

block it in this position. Unscrew the
feet and disassemble the lower door
hinge.
Transpose and secure the lower door
hinge to the opposite unit side after
moving the pin to limit the door open-
ing into the exposed hole. Screw in
the feet accordingly.
Return the unit to the upright position.

Put on the freezer door and fix it in
the intended position.
Rotate the middle door hinge about
180°, transfer and secure it to the op-
posite unit side after moving the blind
cap on the exposed holes.
Put on the fridge door and fix it in the

intended position.
Transfer and secure the upper door
hinge to the opposite unit side after
moving the blind cap on the exposed
holes. Put on the hinge cover.
Check that the doors are aligned vertical-
ly and horizontally to ensure proper open-
ing and closing of the doors.

Startup / Operation

Prior to first use
CAUTION:
After transport, the appliance should be
left standing upright for four hours before
connecting to the power supply. Nonob-
servance could lead to malfunction of the
cooling system and causes an appliance
breakdown.
Clean the appliance interior including all
accessory parts. Consider the instruc-
tions which we provide in the chapter
"Cleaning and Maintenance".
Starting the appliance
Connect the appliance to the power

supply.
Operate the control panel. See also

the following sections.
30