Startup / Operation - BOMANN SBS 7324.1 Bedienungsanleitung, Garantie

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

at locations with high humidity (e.g. outdoors,

bathroom), as metal parts would be suscepti-

ble to corrosion under such circumstances;

near volatile or flammable materials (e.g. gas,

fuel, alcohol, paint, etc.), in rooms which may

have poor air circulation (e.g. garages).

Do not expose the appliance any weather.

Levelling the appliances doors

If the doors are not at the same level and do not

close parallel to each other, the refrigerator door

must be aligned.

Maximum tolerance compensation is 5 mm!

Open the door, loosen the locknut (2) with a wrench

(3)..

if the refrigerator door is too low

nut (1) counterclockwise to raise the door.

if the refrigerator door is too high

nut (1) clockwise to lower the door.

Once the doors are aligned, retighten the locknut (2).

Electrical connection

WARNING:

 The installation to the mains supply must conform

to the local standards and regulations.

 Improper connection may cause to an electric

shock!

 Do not modify the appliance plug. If the plug does

not fit properly to the outlet, let install a proper

outlet by an authorized specialist.

 The accessibility of the power plug must be en-

sured to disconnect the appliance from the power

supply in case of emergency.

, turn the adjusting

 Make sure that the voltage supply matches the

specifications on the rating label before connect-

ing.

 Connect the mains cable to a properly installed

and earthed wall outlet.

 If the plug after installation is not accessible, a

corresponding disconnect device must be availa-

ble to meet the relevant safety regulations.