Herunterladen Diese Seite drucken

Kärcher SC 1125 Plus Bedienungsanleitung Seite 22

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
Cleaning of Glass
In case of low outside temperatures, espe-
cially in the winter, warm up the window
pane by slightly steaming the entire glass
surface. This will prevent tensions on the
surface which might lead to glass break-
age.
Caution
Do not direct steam onto the sealed loca-
tions of the window frame to prevent dam-
age.
Steam gun
You can use the steam gun without any ad-
ditional accessories, e.g.:
to remove odours and wrinkles from
hanging clothes by steaming them at a
distance of 10 to 20 cm.
to remove dust from plants. Here, keep
a distance of 20-40 cm.
for moist dusting, by briefly steaming
the cloth and wiping the furniture with it.
Detail nozzle
The closer this nozzle is to the contaminat-
ed area, the higher the cleaning effect, as
the temperature and the steam are highest
at the nozzle output. Especially suited for
cleaning difficult access locations, joints,
fittings, drains, sinks, toilets, blinds and
heaters. Heavy limescale can be drenched
in vinegar prior to steam-cleaning. Let the
vinegar penetrate for about 5 minutes.
Round brush
Attach the round brush directly to the detail
nozzle. Especially well-suited for hard to
access locations, such as fittings or drains.
Caution
Not suited for the cleaning of sensitive sur-
faces.
Hand nozzle
Pull the terry cloth cover over the hand noz-
zle. Especially well-suited for small washa-
ble areas, shower stalls, mirrors or furniture
cloth material.
Micro-fibre abrasive cloth
Pull up the micro-fibre abrasive cloth over
the hand nozzle.
Application:
Removing calcium and soap residues in
the bath-room (for e.g shower cabins,
tiled walls).
While cleaning mirrors, we recommend
that you polish again using a micro-fibre
cloth (micro-fibre set of dusters "Bath",
order no. 2.863-171).
Can be washed at 60 °C; please do not use
any soft detergents. Not suitable for drier.
Suited for all washable wall and floor cover-
ings, e.g. stone floors, tiles and PVC floors.
Work slowly on very dirty surfaces to allow
the steam to act on the dirt for a longer pe-
riod of time.
Note:Detergent residue or care emulsions
that are still present on the surfaces to be
cleaned, can lead to smears when steam
cleaned. However, these will disappear
with repeated cleaning procedures.
Attach the floor cloth to the floor nozzle.
1 Fold the floor cloth the long way and
place the floor nozzle on top of it.
2 Open holding clamps.
3 Place the cloth ends into the openings.
4 Close the holding clamps.
Caution
Do not insert fingers between the clamps.
Steam turbo brush
The steam turbo brush is set swinging by
the emitted steam and is suited ideally for
the easy cleaning of extreme dirt at places
in the kitchen and the bathroom that are dif-
ficult to access.
– 10
EN
Floor nozzle
21

Werbung

loading

Diese Anleitung auch für:

1.518-202