Hitachi CENTRAL STATION PSC-A32MN Installations- Und Betriebshandbuch Seite 45

Operation
5.2.3.4 Setting Temperature
1 Select the target group for the change of setting temperature at the "Monitor (All Groups)" or "Monitor (Block)" screens. The
screen with the settings for the selected group is displayed on the touchscreen.
Monitor (All Groups)
(1)
2 By tapping " ", the temperature is increased by 1ºC (Max 30ºC). By tapping " ", the temperature is decreased by 1ºC (Min 19ºC
in cooling, dry and fan operation; Min 17ºC in heating operation).
3 Tap "Monitor screen" to return to the "Monitor" screen.
?
N O T E
• By tapping "<" or ">" at the detailed setting screen, the Setting Temperature will be switched to another group in the same block.
• Control Restricted (Run/Stop Only) : In case of "Enable", each Setting Change is for all Groups or Blocks. Setting Change is not possible for each
Group.
• The figure above shows an example of the setting temperature for a connected Air Conditioner Unit. The setting temperature range may not be
indicated in certain case.
• If the settings are mixed when multiple groups are selected, the display will remain blank.
37 PMML0332A rev.0 - 05/2015
(3)
Monitor (Block)
(1)
(2)