Hitachi CENTRAL STATION PSC-A32MN Installations- Und Betriebshandbuch Seite 36

Operation
5.2.2 Group and block settings
5.2.2.1 Display of All Groups
1 Tap "All Groups" on the touchscreen display.
The tab marked with (1), "All Groups", is not displayed if only one block has been registered.
2 All groups are displayed on the touchscreen (all the indoor units connected to the central station are shown). The operation
status of each group is indicated by the colour of the group, as shown below:
(2)
28 PMML0332A rev.0 - 05/2015
(1)*
Green: Run
Grey: Stop
Red: Abnormal
?
N O T E
• "All Groups" screen may be different depending on the Control
Pattern. The screen on the left corresponds to the display of Pattern
A (4 Blocks × 8 Groups), as set by Control Pattern.
• The touchscreen display is put to sleep mode automatically when
the touchscreen is not operated for a given length of time. Tap the
screen to wake up.