ELCOM RTD112Y Anleitung Seite 46

RTD112Y
Applications
APPLICATION N° 6: SIP relay switching on system
failure
SUBNET MAINNET
The SIP relay is used as a switching device (e.g. audible warning or flashing
lighting) when a system fault occurs such as loss of power supply or network
connectivity. Relays K1 and/or K2 are continuously activated, deactivating only

when there is a system fault.
ISS-300
K1 / K2
Configuration:
In the SIP relay "Quickstart" menu, select "Relays" and:
• validate the "Error" function for relay 1 (K1),
and/or
• validate the "Error" function for relay 2 (K2).
46 Subject to technical changes www.elcom.de