ELCOM RTD112Y Anleitung Seite 40

RTD112Y
Applications
In the SIP relay "Expert configuration" menu, select "Relays" and choose:
• the "call status" function for relay 1 (K1),
and/or
• the "call status function" for relay 2 (K2).
In the SIP relay "Expert configuration" menu, select "Expert mode" in "Call
destinations" and fill in:
• the Call destination name: the name of the device (outdoor caller unit) which
is authorised to control the SIP relay (e.g. "Door Module" if you want the relay
to respond to this module);
• the SIP ID: the SIP address of the device authorised to control the SIP relay
(e.g. 201, which may be the SIP ID for the door module above);
• the SIP relay activation DTMF codes (codes 96 and 98);
• the "Incoming" call as "Signalling" (with optional beep + announcement)
using the scroll-down menu.
• the "Call status" as ON.
40 Subject to technical changes www.elcom.de