ELCOM RTD112Y Anleitung Seite 30

RTD112Y
Quickstart configuration
"General" tab
The SIP relay is protected by default by a very simple password (1234). This
must be modified as soon as possible (1). Enter a new password and click on
"Save" to validate. The Web interface language (English by default) can also
be set.
(1) It is the user's responsibility to ensure the installation is secure. A password that is too easy to find can undermine its security (especially if the relay provides specific types of access,
via the opening of electrical latches). Furthermore, a specific password should be used for your intercom system and must be different from the passwords you use to connect up
to Web sites and mobile applications.
(2) It is highly advisable not to modify the default configuration, unless you have perfect control over the IP networks and IP intercom system devices. Indeed, any change to equipment
may require all the system devices to be completely reconfigured so that the system can continue to operate.
30
"Network" tab
The network parameters can be entered manually (2) or obtained automati-
cally via the server (DHCP).
• IP Address: you can manually enter an unused network IP address (IP ad-
dress allocated by default for the SIP relay: 192.168.42.71).
• The Subnetwork Mask defines the network structure (size: 255.255.255.0).
• The Gateway is the IP address of the equipment linking this IP network to
the other IP networks in the installation (by default: ISS-300 IP address).
Subject to technical changes www.elcom.de