ELCOM RTD112Y Anleitung Seite 44

RTD112Y
Applications
APPLICATION N° 5: SIP relay command (via the
"Call" command and Z1/Z2 potential-free inputs)
The SIP relay is used as the switching device of a secondary signalling unit
(e.g. audible warning or flashing lighting). A push-button is connected to the
Z0 input or the contacts (associated with the 24 V supplied by the relay) are
connected to the Z1 and/or Z2 potential-free inputs and switch the SIP relay
without triggering communication (floor call). The activation duration of relays
K1 and/or K2 can be set in the SIP relay configuration.
Configuration:
In the SIP relay "Quickstart" menu, select "Button Z0" in "Call destinations"
and fill in:
• the call destination: the name of the call group that must respond to the event
coming from the Z0/Call connector (e.g. "Call Zone 1");
• the SIP ID: the SIP address of the call group to be called (e.g. 101, which may
be the SIP ID of the call group above);
• the SIP relay activation DTMF codes (codes 96 and 98).
44
SUBNET
Z0 / Z0G
Subject to technical changes
ISS-300
24 V
Z1 / Z1G
12-
Z2 / Z2G
24 V
K1 / K2
MAINNET
www.elcom.de