Factory Settings; Access To Ip Intercom Sip Server - Elcom Rtd112Y Anleitung

RTD112Y
Network

Factory settings

SUBNET

Subnetwork access
to RTD112Y
IP address in subnetwork
192.168.42.71
Access data administration
Username: admin
Password: 1234
192.168.42.71
(1) "ISS-300-IP" is the ISS-300 IP intercom SIP server IP address in the main network, and
"Port" is a specific port for reaching the SIP relay that is automatically allocated and
configured on the ISS-300 ( see next chapter on "Access to IP intercom SIP server").
28
MAINNET
ISS-300
Main network access
to RTD112Y
Main network IP address
ISS-300-IP:Port (1)
Access data administration
Username: admin
Password: 1234
ISS-300-IP:Port (1)

Access to IP intercom SIP server

(SIP relay in subnetwork)
For an installation with the ISS-300 IP intercom SIP server, connect the SIP
relay to the subnetwork first. Then, in the intercom server interface, select "De-
vices/IP Scanner" and scan the subnetwork.
The SIP relay will be located and displayed.
Once the "Add to Devices" function has been run, the configuration interface
can be accessed from the main network via an HTTP link.
For further details about how the ISS-300 works, read the corresponding ma-
nual.
Subject to technical changes www.elcom.de