ELCOM RTD112Y Anleitung Seite 42

RTD112Y
Applications
In the SIP relay "Quickstart" menu, select "Button Z0" in "Call destinations"
and fill in:
• the call destination: the name of the call group that must respond to the event
coming from the Z0/Call connector (e.g. "Call Zone 1");
• the SIP ID: the SIP address of the call group to be called (e.g. 101, which may
be the SIP ID of the call group above);
• the SIP relay activation DTMF codes (codes 96 and 98).
In the SIP relay "Quickstart" menu, select "Connector Z1" in "Call destina-
tions" and fill in:
• the call destination: the name of the call group that must respond to the event
coming from the Z1 connector (e.g. "Call Zone 1");
• the SIP ID: the SIP address of the call group to be called (e.g. 101, which may
be the SIP ID of the call group above);
• the SIP relay activation DTMF codes (codes 96 and 98).
In the SIP relay "Quickstart" menu, select "Connector Z2" in "Call destina-
tions" and fill in:
• the call destination: the name of the call group that must respond to the event
coming from the Z2 connector (e.g. "Call Zone 1");
• the SIP ID: the SIP address of the call group to be called (e.g. 101, which may
be the SIP ID of the call group above);
• the SIP relay activation DTMF codes (codes 96 and 98).
42 Subject to technical changes www.elcom.de