Connecting To The Sip Relay - Expert Configuration - Elcom Rtd112Y Anleitung

RTD112Y
Quickstart configuration/Expert configuration
To connect up to the SIP relay Web interface:
• connect up to the ISS-300 IP intercom SIP server,
• in "Devices/IP Devices", click on the active link to the device name...
• ... then
32
Connecting up to the SIP relay - Expert configuration
After calling up the Web interface, select "Expert configuration" in the menu.
You will then be invited to enter the password (default password: 1234). This
will allow you to access the expert mode setting zone.
All the SIP relay switching function settings are configured on the RTD112Y.
To apply modifications, always press on the "Save" button in the top right-
hand corner.
Subject to technical changes www.elcom.de