T22
Accident prevention
According to the prevailing accident prevention regulations, once the torque
transducer has been mounted, a covering agent or cladding has to be fitted as
follows:
The cover or cladding must not be free to rotate.
The cover or cladding should avoid squeezing or shearing and provide
protection against parts that might come loose.
Covers and cladding must be positioned at a suitable distance or be
arranged so that there is no access to any moving parts within.
Covers and cladding must also be attached if the moving parts of the torque
transducer are installed outside peoples' movement and operating range.
The only permitted exceptions to the above requirements are if the various
parts and assemblies of the machine are already fully protected by the design
of the machine or by existing safety precautions.
A2302-6.0 en/de
7
HBM