HBM T22 Montageanleitung Seite 17

T22
Specifications (continued)
Nominal (rated) torque M
Impact resistance, test severity
level according to DIN IEC 68;
Part 2‐27; IEC 68‐2‐29‐1987
Number
Duration
Acceleration (half sine)
Vibration resistance, test
severity level per DIN IEC 68,
Part 2‐6: IEC 68‐2‐6‐1982
Frequency range
Duration
Acceleration (amplitude)
Nominal (rated) speed n
3)
Load limits
Limit torque, related to M
Breaking torque, related to
M
nom
Longitudinal limit force
Lateral limit force
Bending limit moment
Oscillation width per DIN 50100
4)
(peak‐to‐peak)
3)
Each type of irregular stress (bending moment, lateral or longitudinal force, exceeding nominal (rated)
torque) can only be permitted up to its specified static load limit provided none of the others can occur at
the same time. If this condition is not met, the limit values must be reduced. If 30% of the bending limit
moment and lateral limit force occur at the same time, only 40% of the longitudinal limit force is
permissible and the nominal (rated) torque must not be exceeded. The permissible bending moments,
longitudinal forces and lateral forces can affect the measurement result by approx. 1 % of the nominal
(rated) torque.
4)
The nominal (rated) torque must not be exceeded.
5)
Note the maximum moment (T
A2302-6.0 en/de
Nm 5
nom
kNm
n
ms
2
m/s
Hz
h
2
m/s
rpm
nom
%
nom
%
kN 0.9
N 25
Nm 0.5
%
) of the couplings.
max
10 20 50 100
1000
3
650
5 ... 65
1.5
50
16 000 12 000
200
> 280
0.9 0.9 1.6
45 90 210 420
0.9 1.9 5.5
80
17
200 500
9 000
5)
1.6 1.6 4
850 1400 2800
11 22 54 109
HBM
1
4