Ryobi RBC52FSB Bedienungsanleitung Seite 18

Wear non-slip safety footwear when
using this equipment.
Wear non-slip, heavy duty gloves.
Use unleaded petrol intended for motor
vehicle use with an octane rating of 91
[(R + M)/2] or higher.
Use 2-stroke oil for air cooled engines.
Mix the fuel mix thoroughly and also each
time before refuelling
CE Conformity
GOST-R Conformity
Tri-Arc blade
Blade thrust may occur without warning if
the blade snags, stalls or binds.
Wear eye and hearing protection when
operating this product.
To reduce the risk of injury or damage,
avoid contact with any hot surface.
Fire hazard
10
Set the ignition switch to the "I" (ON)
position.
Fully press and release the primer bulb
5 times.
Pull the starter grip until the engine
attempts to start.
Starting a cold engine
Starting a warm engine
Direction of handle rotation
English(Original instructions)
DESCRIPTION
1. Power head
2. Strap hanger
3. Bike handle
4. Shaft
5. Blade guard
6. Tri-Arc™ blade
7. ReelEasy™ head
8. Knob
9. Quick release tab
10. Latch
11. Mounting bracket
12. Screw
13. Grass defl ector
14. Screw
15. Locking tabs
16. Notches
17. Allen wrench (M6)
18. Hole in the gear case
19. Hole in the upper fl ange washer
20. Upper fl ange washer
21. Blade cover
22. Cupped washer
23. Washer
24. Blade nut
25. Gear head
26. Spark plug wrench
27. Drive connector
28. String head housing
29. Spring
30. Hex bolt
31. Spoo
32. Knob
33. String head cover
34. Best cutting area
35. Dangerous cutting area
36. Direction of rotation
37. Ignition switch
38. Throttle trigger
39. Throttle interlock
40. Throttle lock
41. Primer bulb
13
Guaranteed sound power level is 113 dB.
Choke closed
Choke open.
Pull: Quick release tab