Jacuzzi PROFESSIONAL Serie Vorinstallationsblatt Seite 23

When plastic materials, wood, etc. are used, make sure that
they are approved for use with electrical installations, and ap-
proved for self-extinguishing properties.
The installer must comply with the above, as well as using wa-
tertight fittings at the junction points, and ensuring compli-
ance with the specific standards for fixtures in force in the
country where the hot tub is installed.
You must comply with this last regulation. Any other proce-
dure is prohibited.
Electrical safety
The Jacuzzi® hot tubs are safe appliances, manufactured accord-
ing to EN 60335.2.60, EN 61000, EN 55014 standards and test-
ed during production to guarantee user safety.
Installation must be carried out by qualified personnel who
are authorised to install the product, in compliance with the na-
tional regulations in force.
It is the installer's responsibility to select the mate-
rials according to use, carry out the installation cor-
rectly, and verify the condition of the network to
which the appliance will be connected, as well as its
suitability in ensuring usage safety during mainte-
nance and inspection operations.
The Jacuzzi® hot tubs are class "1" appliances. This means that
they must be connected to the electrical mains and earthing
system permanently, without any intermediary junctions.
The building's electrical system must be equipped
with a 0.03 A residual current device and an efficient
earthing circuit.
Make sure that the residual current device is in good
working order by pressing the TEST button, which
must trip.
Parts incorporating electrical components, with the
exception of remote-control devices, must be posi-
tioned or fixed so that they cannot fall into the tub.
Live components and equipment must not be within
the reach of individuals in the hot tub.
Where the building's electrical system is not able to
guarantee a constant power supply, we recommend
installing a voltage regulator, suitably sized for the
power of the appliance, before installing the appli-
ance itself.
When connecting to the mains, we advise installing a multi-
pole circuit breaker, which completely disconnects the appli-
ance in the event of a category III overvoltage (
devices must be positioned in an area that complies with the
safety regulations.
Jacuzzi Europe S.p.A. © 2023
The installation of electrical devices and equipment (sock-
ets, switches, etc.) near the hot tub must comply with the legal
standards and regulations in the country where the hot tub is
installed.
For the equipotential connection prescribed by the specific
national standards, the installer must use the terminal provided
(as per standard EN 60335-2-60
fied with the
masses surrounding the hot tub, such as water pipes, gas pipes,
metal boards around the edge, etc., are equipotential.
The equipment is fitted with an LED lighting system compliant
with the standard EN 62471.
CAUTION! Before carrying out any maintenance, discon-
nect the appliance from the electrical power supply.
3-4); these
23
)
on the spa-pack (
symbol. In particular, ensure that all the metal
Jacuzzi Europe S.p.A. © 2023
4), identi-