Toro eHoverPro 450 Bedienungsanleitung Seite 14

Product Overview
Figure 14
1. Handlebar
2. Operator-presence bail
3. Electric-start button/switch
4. Battery-compartment
cover
Controls
Operator-Presence Bail
The operator-presence bail
power to the motor.
•
Squeeze the bail to the handlebar to run the motor.
•
Release the bail to the handlebar to shut off the
motor.
Electric-Start Button
The electric-start button
electric-start switch, and together they are used to
control the electric motor.
5. Mower deck
6. Handlebar footstop
7. Handlebar knobs
(Figure 14) controls the
(Figure 14) inserts into the
Specifications
Machine Specification
Model
02614T
Charging, Operation, and Storage
Temperature Ranges
Temperature Range Specification
Charging or
Storing the
Battery Pack
5°C (41°F) to 40°C
(104°F)*
*Charging time may increase if you do not charge the
battery pack within the specified temperature range.
Store the machine, battery pack, and battery charger
g414369
in an enclosed, clean, and dry area.
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous.
12
Cutting width Product width
465 mm (18-1/2 575 mm (22-1/2
inches) inches)
Using the Battery Using the
Pack Machine
-30°C (-22°F) to 0°C (32°F) to 49°C
49°C (120°F)* (120°F)*