Operating Elements And Connections; Mounting - EuroLite LED KLS-10 COMPACT LIGHT SET Bedienungsanleitung

4.2 Operating elements and connections

1
Fixation screw
2
Power input with fuse holder
• Used to plug the supplied power cord in.
• Only replace the fuse when the device is
disconnected from mains. Only use fuses of the
same rating and power. The correct value is
specified on the device.
3
Jack DMX OUT
DMX signal input (3-pin XLR) for connection to the
DMX input of another light effect unit.
4
Jack DMX IN
DMX signal input (3-pin XLR) for connecting a DMX
controller.
5
Connector for the foot pedal FP-1
6
Sensitivity control for the microphone
7
LED display
8
Jacks POWER OUTPUT
IEC jacks for power supply of further devices.
9
QuickDMX input
DMX signal input (5-pin XLR) for connecting a
wireless QuickDMX receiver. The connector
provides the required 5 V operating voltage.
10
Microphone for sound-controlled operation
11
Control buttons
12
Mounting bracket
13
LED spot 1 to 4
14
Connection cable for the control unit
15
TV pin for placing on a stand
16
Fixation screw
26/40
00082778.DOCX, Version 1.0