Master/Slave Operation With Several Light Sets; Remote Control With The Foot Pedal Fp-1 - EuroLite LED KLS-10 COMPACT LIGHT SET Bedienungsanleitung

Master/slave operation with several light sets

1
When several light sets are interconnected (→ 6.5), the slave units can be synchronized and controlled
with the master unit. For this select the desired operating mode (music control or automatic mode) at
the master unit and set each slave unit to a DMX starting address as desired (→ 7.4). The
interconnected light sets will now operate in sync.
2
When the master unit is to be controlled with the foot pedal FP-1 or FP-2, also select the operating
mode music control or automatic mode and set each slave unit to a DMX starting address as desired.
The interconnected light sets can now be operated in sync with the foot pedal.

7.2 Remote control with the foot pedal FP-1

The foot pedal available as accessory allows convenient control of the light set. Short actuation and long
actuation of the pedals activates different functions. After switching off and on again, the operating mode
selected last is activated.
1
Pedal 1 PRESETS – Spot 1-4, automatic mode and fade
• Repeated short actuation: for the following functions
Number
1
2
3
4
5
6
7
• Long actuation: fade function 1-5
2
Pedal 2 SOUND CONTROL – Sound control and chaser
• Short actuation: to select sound control
• Long actuation: to select the chaser (speed 0.5 s)
Chaser
Step 1
Step 2
Step 3
Step 4
3
Pedal 3 FREEZE – Freeze and strobe effect
• Short actuation: to select the freeze function; then the current setting is kept
• Long actuation: to select the strobe effect
4
Pedal 4 BLACKOUT – Blackout
• Short actuation: immediately switches the LEDs off and on
• Long actuation: slowly (2 seconds) switches the LEDs off and on
Function
All spots on
Spot 1 on
Spot 2 on
Spot 3 on
Spot 4 on
Automatic mode
Fade
Spot 1 Spot 2
5 % 100 %
100 % 5 %
100 % 100 %
100 % 100 %
32/40
Spot 3 Spot 4
100 % 100 %
100 % 100 %
5 % 100 %
100 % 5 %
00082778.DOCX, Version 1.0