Operating Determinations - EuroLite LED KLS-10 COMPACT LIGHT SET Bedienungsanleitung

3. OPERATING DETERMINATIONS

The compact light set LED KLS-10 consists of four compact LED spots and the control unit. The light
sources are super bright cool white LEDs which ensure a high energy efficiency and an even light
distribution. The set comes pre-assembled in a practical transport bag. It can be placed on a lighting stand or
mounted to a truss.
Thanks to the integrated control unit with LED display, the light set can be used without external control in
sound-controlled mode or in automatic mode with processor-controlled color changes. Control is also
possible via a DMX controller or the foot pedals FP-1 and FP-2 (matching accessories).
The light set is compatible with QuickDMX devices which allow for wireless transmission of DMX512 signals
in lighting installations. With these devices, extensive cabling between the DMX controller and the light set is
not required.
The light offers mounting points for attaching further light effect units and provides them with power through
IEC outputs.
This device is a lighting effect for creating decorative effects. This product is only allowed to be operated with
an alternating voltage of 100-230 V, 50/60 and was designed for indoor use only.
This device is designed for professional use, e.g. on stages, in discotheques, theatres etc.
Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
This device must never be operated or stockpiled in surroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical
shocks. When using smoke machines, make sure that the device is never exposed to the direct smoke jet
and is installed in a distance of 0.5 meters between smoke machine and device. The room must only be
saturated with an amount of smoke that the visibility will always be more than 10 meters.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the
device during thunderstorms.
- - -m
The symbol determines the minimum distance from lighted objects. The minimum distance
between light output and the illuminated surface must be more than 0.3 meters.
This device is only allowed for an installation via the mounting bracket. In order to safeguard sufficient
ventilation, leave 50 cm of free space around the device.
The housing must never touch surrounding surfaces or objects.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
Always fix the fixture with an appropriate safety bond.
The maximum ambient temperature T = 45° C must never be exceeded.
a
24/40
00082778.DOCX, Version 1.0