Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7. OPERATION
After connecting the unit to the mains it requires a short initialization process and is then ready for operation.
It may be controlled via DMX controller or a foot pedal. Alternatively, it can be operated without external
control in sound-controlled mode or in automatic mode with processor-controlled color changes. The
operating modes can be selected by means of the display and the control buttons. After switching the light
set off and on again, the operating mode selected last is activated.
Fig. Menu structure
7.1 Operation without external control
Sound control
1
Via the microphone, which is integrated in the control unit, the rhythm of the music (sufficient bass
provided) can be perfectly reproduced by the light set. To select sound control press the button MENU
so many times until
2
Adjust the microphone sensitivity to the volume of the music with the control SENSIVITY. If the volume
of the music is changed afterwards, the microphone sensitivity must be readjusted accordingly.
Automatic mode
1
To select the automatic mode with processor-controlled color changes, press the button MENU so
many times unti
2
Once again, press the button MENU to select menu item speed
adjust the desired speed in automatic mode from high (S 01) to low (S 100). Press ENTER to confirm
your setting.
is indicated in the display. Press ENTER to confirm your setting.
is indicated in the display. Press ENTER to confirm your setting.
31/40
. Use the buttons [▲] and [▼] to
00082778.DOCX, Version 1.0
Werbung
Inhaltsverzeichnis
