Cleaning - WIKA NETRIS 1 Betriebsanleitung

7. Maintenance, cleaning / 8. Dismounting, return ...
instrument with your hands and turn them in opposite directions to tighten.
→ On closing the case top, ensure that the battery connection cables do not become
pinched.
EN Make absolutely sure that there is no gap between the case top of the
sensor and the thread. The sensor is only considered closed when the gap
is completely closed. Be careful not to accidentally loosen the instrument
when changing the battery. Tighten without tilting the case top!

7.3 Cleaning

CAUTION!
Physical injuries and damage to property and the environment
Improper cleaning may lead to physical injuries and damage to property
and the environment. Residual media in the dismounted instrument can
result in a risk to persons, the environment and equipment.
▶
▶
CAUTION!
Damage to property due to improper cleaning
Improper cleaning may lead to damage to the instrument!
▶
▶
▶
1. Prior to cleaning, properly disconnect the instrument from the power supply and, if
required, deactivate the data transmission from the radio unit during cleaning.
2. Clean the instrument with a moist cloth.
The antenna connection must not come into contact with moisture!
28
Use the requisite protective equipment.
Carry out the cleaning process in accordance with the manufacturer's
instructions.
Do not use any aggressive cleaning agents.
Do not use any hard or pointed objects for cleaning.
Do not use solvents or abrasives for cleaning.
WIKA operating instructions WIKA-radio unit, model Netris
®
1