Maintenance, Cleaning And Recalibration - WIKA A2G-60 Betriebsanleitung

6. Maintenance, cleaning and recalibration

6. Maintenance, cleaning and recalibration
Personnel: Skilled electrical personnel
Tools: Voltage tester, screwdriver
For contact details, see chapter 1 "General information" or the
back page of the operating instructions.
6.1 Maintenance
This instrument is maintenance-free and offers long service life provided
it is handled and operated properly.
Repairs must only be carried out by the manufacturer or appropriately
qualified skilled personnel.
6.2 Cleaning
CAUTION!
Physical injuries and damage to property and the
environment
Improper cleaning may lead to physical injuries and damage
to property and the environment. Residual media in the
dismounted instrument can result in a risk to persons, the
environment and equipment.
▶
Carry out the cleaning process as described below.
1. Before cleaning, correctly disconnect the instrument from the pressure
supply, switch it off and disconnect it from the mains.
2. Use the requisite protective equipment.
3. Clean the instrument with a moist cloth (soapy water).
Electrical connections must not come into contact with moisture!
WIKA operating instructions model A2G-60
EN
17