5. Commissioning, operation / 6. Fault
Change in measured value (slope) falling
Calculated
pressure change
EN
Alarm limit
Sensor
measured
value
6. Fault
Personnel: Skilled personnel
CAUTION!
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the instru-
ment must be taken out of operation immediately.
▶
▶
▶
Contact data see chapter 11 "General information" or the back page of the
operating instructions.
24
Alarm trig-
gered
Measuring
interval
Ensure that no signal is transmitted anymore and protect against being
put into operation accidentally.
Contact the manufacturer.
If a return is needed, please follow the instructions given in chapter
8 "Dismounting, return and disposal".
WIKA operating instructions WIKA-radio unit, model Netris
Alarm switched off
Time
®
1