Alarm Specifier - Balluff BNI PNT-502-102-Z078 Konfigurationsanleitung

BNI PNT-508-105-Z067 / BNI PNT-508-105-Z077 / BNI PNT-502-102-Z078
Network interface
4
Diagnose (continued)
Other values
0x53 Actuator deactivation Pin 4/
Port 0...3
0x54 Actuator deactivation Pin 2/
Port 4...7
0x55 Actuator warning Pin 4/Port 0...3
0x56 Actuator warning Pin 2/Port 4...7
0x57 Restart Pin 4/Port 0...3
0x58 Restart Pin 2/Port 4...7
0x59 Outputs Pin 4/Port 0...3
0x5A Outputs Pin 2/Port 4...7
0x5B Inputs Pin 4/Port 0...3
0x5C Inputs Pin 2/Port 4...7
0x5F IO-Link PD Valid
Tab. 5-7: Module ID
Submodule ID
4 bytes of data; Submodule ID describes which
submodule is being used with the respective module
(Submodule ID is saved in the GSDML).
Other values
0x00000001
Tab. 5-8: Submodule ID
46 english
Meaning
Meaning
BNI PNT-xxx-xxx-xxxx
5.3

Alarm Specifier

2 bytes of data; Alarm Specifier divided as follows:
Sequence Number
Bit 0...10 This counter is incremented with every new
diagnosis message.
Channel Diagnostic
Bit 11 – possible values
0x00
0x01
Tab. 5-9: Channel Diagnostic – Bit 11
Manufacturer Specific Diagnosis
Bit 12 – possible values
0x00
0x01
Tab. 5-10: Manufacturer Specific Diagnosis – Bit 12
Submodule Diagnostic State
Bit 13 – possible values
0x00
0x01
Tab. 5-11: Submodule Diagnostic State – Bit 13
Bit 14
Reserved
ARDiagnosis State
Bit 15 – possible values
0x00
0x01
Tab. 5-12: ARDiagnosis State – Bit 15
User Structure ID
2 bytes of data; User Structure ID describes the type of
diagnosis.
Other values
0x8000
Tab. 5-13: User Structure ID
Meaning
No channel-based
diagnosis available
Channel-based diagnosis
available
Meaning
No manufacturer-based
diagnosis available
Manufacturer-based
diagnosis available
Meaning
No further diagnosis of the
submodule available
At least one further
diagnosis of the
submodule available
Meaning
No further diagnosis of the
module available
At least one further
diagnosis of the module
available
Meaning
Channel-based diagnosis