Main Menu; Factory Reset - Balluff BNI PNT-502-102-Z078 Konfigurationsanleitung

BNI PNT-508-105-Z067 / BNI PNT-508-105-Z077 / BNI PNT-502-102-Z078
Network interface
2
Display (continued)
3.5

Main menu

► Press the Set button briefly to scroll through the main
menu.
► Press the arrow button to bring up the menu.
Standard view
Least significant octet of the IP address
Menu: Network configuration
Menu: Module information
3.6

Factory Reset

A factory reset can only be performed after a
power reset without a network cable connected.
1. Press the arrow button briefly to navigate to the
n c menu.
etwOrk Onfig
2. On the f r menu item, press and hold the S
actOry eSet
button ≥ 3 s to reset the module to factory settings.
3. Press the arrow button briefly to reject the reset
or
Press the S button again to confirm the reset.
After the reset, the module restarts automatically.
Fig. 3-3: Factory Reset
24 english