BNI PNT-508-105-Z067 / BNI PNT-508-105-Z077 / BNI PNT-502-102-Z078
Network interface
2
System integration (continued)
Prioritized startup
If fast startup (FSU) is activated, the modules start up
within a time of less than 350 milliseconds.
To activate the function, settings must be made in the
hardware configuration.
Activating fast startup
► Activate the p
riOritized Startup
Fig. 2-2:
Activating prioritized startup
To ensure optimal startup in less than 350 milliseconds,
the following prerequisites must be met:
–
The transfer speed must be fixed at 100 MBit at all
connected ports.
–
Autonegotiation must not be enabled.
–
Note the port direction: Port 1 IN – Port 2 OUT
–
Unassigned PN-IO ports (e.g. last module in the line
topology) must not be switched.
Fig. 2-3:
Prioritized startup – Settings
6
english
checkbox.